Martin RoboColor III Guia do Utilizador descarregar pdf (Página 6)

Connections

Setting the mains voltage switch

Before connecting the controller to the mains, ensure that the voltage selector switch on the

back of the controller is set for your local power supply.

Fitting a mains plug

If necessary connect a three pin plug to the mains cable using;

- the BROWN wire for the LIVE connection,

- the BLUE wire for the NEUTRAL connection and

- the GREEN/YELLOW wire for the EARTH (Ground) connection.

Linking the Units to the 2308 Controller

All data (instructions) goes from the data output of the controller (3 pin female XLR), via a

standard balanced microphone cable, to the data input (3 pin male XLR) on the first Unit

to be on the

link

. This Unit has also a data output (3 pin female XLR) which allows you to

continue the serial data link to the next Unit, etc. (daisy-chain).

Martin 2308 Controller Version 2.1/3.1 Page 7

1 2 3 4 5 6 7 8 9 10 11 ... 60 61

Sem comentários

Martin RoboColor III Guia do Utilizador Página 6