Martin RoboColor III Guia do Utilizador descarregar pdf (Página 37)

CTC, Frost, Prism

[iris]

Press [iris] once to access the effect wheel setting. The status of the

display now changes to {EF_X}, where X indicates the following

effects:

1 Open (no effect).

2 Hot color temperature corrector (5500-3400K).

3 Frost.

4 3-facet prism.

Note that on the 2208 controller the [iris] key is not printed on the

front panel but is located ’invisibly’ just to the right of the right of the

[speed] key.

[up]/

[down]

Move the joystick up or down to change the effect. You will see that

the status of the display changes accordingly.

[iris]

Press [iris] again to quit the effect setting.

Movement, Color and Gobo Speed

[speed]

Press [speed] to access the movement speed setting. The status in

the display now changes to {SPEX}, where X is a number between

1 and 8 indicating the movement speed.

[up]/

[down]

Move the joystick up or down to change the movement speed. You

will see that the status of the display changes accordingly.

[speed]

Press [speed] another time to access the color speed setting (the

speed at which the color wheel scrolls). The status in the display

now changes to {CSPX}, where X is a number between 1 and 8

indicating the speed.

[up]/

[down]

Move the joystick up or down to change the color speed. You will

see that the status of the display changes accordingly.

[speed]

Press [speed] a third time to access the gobo rotation speed setting.

The status in the display now changes to {GSPX}, where X is a

number between 1 and 8 indicating the speed.

[up]/

[down]

Move the joystick up or down to change the gobo speed. You will

see that the status of the display changes accordingly.

[speed]

Press [speed] a fourth time to access the dimmer speed setting. The

status in the display now changes to {dSPX}, where X is a number

between 1 and 8 indicating the dimmer speed.

[up]/

[down]

Move the joystick up or down to change the dimmer speed. You will

see that the status of the display changes accordingly.

[speed]

Finally, press speed once again to quit the speed setting.

Page 38 Version 2.1/3.1 Martin 2308 Controller

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 60 61

Comentários a estes Manuais

Sem comentários

Martin RoboColor III Guia do Utilizador Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Holofotes Martin RoboColor III