Martin RoboColor III Guia do Utilizador descarregar pdf (Página 10)

The front panel

The Martin 2308 controller front panel is divided into four sections:

Channel, Program, Function and Control.

By pressing a key briefly a different mode of the controller is selected. The keys [↑] and [↓]

repeat if pressed down for more than half a second. The [trig] key and the joystick also

repeat when activated for longer than half a second. The repetition rate increases the longer

you operate the control.

Some special functions such as deleting a program require 2 keys to be pressed simul-

taneously. The

initialization

procedure requires 3 keys to be pressed simultaneously.

Channel-section

The channel section includes eight keys labelled [1] - [8] each equipped with an LED. The

numbers correspond to the address settings of the Units. Thus, pressing [1] selects the Unit

that has 1 as its address setting.

Program-section

The program section is used to select different

operation modes

and the

operating functions

related to these modes.

Function-section

The function section is primarily for use in the

run sequence and run show modes

Control-section

The control section includes several keys and a joystick. These functions will be explained

later. Consult the appendicesB-Fforfurther information.

Martin 2308 Controller Version 2.1/3.1 Page 11

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 60 61

Sem comentários

Martin RoboColor III Guia do Utilizador Página 10