Martin RoboColor III Guia do Utilizador descarregar pdf (Página 45)

[left]/

[right]

Move the joystick left or right to split the beam into two neighbouring

colors. The display shows the nearest color.

[color]

Press [color] again to quit the color mode.

Color and Dimmer Speed

[speed]

Press [speed] once to access the speed setting of color flag number

1. The status in the display now changes to {1PEX}, where X is a

number between 1 and 8 indicating the color scroll speed.

[up]/

[down]

Move the joystick up or down to change the color speed. You will

see that the status of the display changes accordingly.

[speed]

Press [speed] another time to access the speed setting of color flag

number 2. The status in the display now changes to {2PEX}, where

X is a number between 1 and 8 indicating the color scroll speed.

[up]/

[down]

Move the joystick up or down to change the color speed. You will

see that the status of the display changes accordingly.

[speed]

Press [speed] a third time to access the dimmer speed setting. The

status in the display now changes to {dSPX}, where X is number

between 1 and 8 indicating the dimmer speed.

[up]/

[down]

Move the joystick up or down to change the dimmer speed. You will

see that the status of the display changes accordingly.

[speed]

Finally, press speed once again to quit the speed setting.

Page 46 Version 2.1/3.1 Martin 2308 Controller

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 60 61

Sem comentários

Martin RoboColor III Guia do Utilizador Página 45