Martin CX-2 Manual do Utilizador descarregar pdf (Página 7)

CX-4 user manual Lamp 7

5 Insert the lamp assembly with the black metal shield up, between the lamp

and the fan. Replace the screws.

To align the lamp

Realignment when changing the lamp may improve performance.

1 Strike the lamp and project the light on a flat surface.

2 Using a 3 mm Allen wrench, center the hot-spot horizontally with the top-left

adjustment screw. Center the hot-spot vertically with the bottom-right

adjustment screw.

3 if there is significant hot-spot, flatten the field by turning all 3 adjustment

screws clockwise 1/4-turn at a time until the light is evenly distributed and

there is no further improvement.

4 If the light is brighter around the edge than it is in the center, or if light output

is low, turn the screws counterclockwise 1/4-turn at a time until the light is

evenly distributed and there is not further improvement.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Sem comentários

Martin CX-2 Manual do Utilizador Página 7