Martin RoboColor III Manual do Utilizador descarregar pdf (Página 13)

User Manual Service and Maintenance 13

LAMP REPLACEMENT

Warning! Disconnect the fixture from AC power before removing any cover.

To reduce the risk of the lamp shattering, never exceed the average lamp life,

listed below, by more than 25%. Disconnect the system from AC power if the

lamp blows. Allow the heads to cool for 15 minutes before installing a new lamp.

The RoboColor III comes with the Martin 150 W Metal Halide lamp installed.

The Osram HTI 150 and GE CSS 150 may be used as well.

Installing any other

lamp may damage the fixture.

To change the lamp

1 Remove the 3 thumbscrews that

secure the access plate of the lamp

socket assembly at the rear of the

head and withdraw the lamp socket

assembly.

2 Remove the old lamp from the

socket.

3 Holding the new lamp in a clean cloth

(do not touch the glass), carefully

insert it firmly and squarely into the

lamp socket.

4 If your fingers touch the glass, clean the bulb with a clean, lint-free cloth

wetted with alcohol.

5 Replace the lamp-socket assembly and tighten the thumbscrews.

Martin 150 W

Metal Halide Osram HTI 150 GE CSS 150

P/N 97010107 97010108 97010104

Average Life 2000 h 750 h 1000 h

Color Temp. 5000K 6500K 5000K

Output 900 lm 1200 lm 900 lm

Remove

screws.

Withdraw lamp socket assembly.

Hold only by the

ceramic base.

Do not touch the

glass

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Martin RoboColor III Manual do Utilizador Página 13