Martin Atomic Colors Manual do Utilizador descarregar pdf (Página 11)

MPU-02 Connection Procedure

1. Rig the combined Atomic 3000 DMX and Atomic Colors fixture in the desired position,

ensuring that you use the safety wire as a secondary means of attachment.

2. Connect the power/data output on the MPU-02 to the power/data input on the Atomic

Colors with an XLR-4 cable.

3. Connect the MPU-02 to the main data link using the XLR-5 input. You can, for example,

run a 5-pin XLR cable from the DMX output of an Atomic 3000 DMX to the input of the

power supply. For more information on building a data link, please refer to the Atomic

DMX 3000 user manual. Continue “daisy-chaining” the DMX link by connecting the 5-

pin DMX thru socket on the power supply to the next Atomic 3000 DMX, power supply,

or other fixture.

4. Connect a second Atomic Colors unit, if desired, to the first unit using the second XLR-4

socket and an XLR-4 cable.

5. Connect the MPU-02 and the Atomic 3000 DMX units to the AC supply.

Note: Before operating the Atomic strobe, make sure the power supply for the Atomic

Colors is connected, and switched on.

System connections using the MPU-02 power supply.

Atomic Colors User Manual Connecting the unit 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Sem comentários

Martin Atomic Colors Manual do Utilizador Página 11