Martin Ego 01 Manual do Utilizador descarregar pdf (Página 9)

Installation 9

securely to the fixture’s mounting bracket with a grade 8.8 (minimum)

M12 bolt and lock nut, or as recommended by the clamp manufacturer.

3. If mounting the fixture on a surface, install an eyebolt that can hold ten

times the weight of the fixture in the mounting surface for the safety

cable.

4. Working from a stable platform, fasten

the fixture to the structure or surface. If

mounting on a surface, use a grade

8.8 (minimum) M12 bolt or screwbolt,

passing it through the hole in the

fixture’s mounting bracket (see

illustration).

5. Install a safety cable that can

hold at least 10 times the

weight of the fixture, passing

it through the fixture’s

handle (see illustration) and

around the mounting structure

or through the eyebolt in the

mounting surface.

Warning! Do not simply pass the

safety cable through the

fixture’s mounting bracket,

as this will leave the fixture

unsecured.

6. Loosen the swivel locks, tilt the fixture to the desired angle, and

retighten.

7. Check that the fixture is held securely.

8. Check that the fixture is at least 0.3 meters (12 in.) from the surface to

be illuminated and at least 0.1 meters (4 in.) from any combustible

materials.

9. Check that the clearance around the air vents is at least 0.1 meters (4

in.), and that airflow around the vents is free and unobstructed.

Rigging clamp

Safety cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Sem comentários

Martin Ego 01 Manual do Utilizador Página 9