Martin MX SERIES Manual do Utilizador descarregar pdf (Página 11)

Stand-alone operation

not strike, disconnect the fixture from power for several minutes to reduce strain on

the starter while the lamp cools.

MASTER / SLAVE OPERATION

Up to 32 MX-4s can be connected together and operated in master/slave mode in

which slave fixtures follow instructions sent from the master.

Important! Set only 1 fixture as master: damage can occur if 2 masters, or

a master and a controller, are linked together.

To set up MX-4s for master/slave operation

1 Disconnect all fixtures from power.

2 Plug a data cable into the OUT socket of the first

fixture and the IN socket of the next one. Continue

connecting up to 32 MX-4s output-to-input.

3 Insert a female termination plug (P/N 91613018) in the

IN socket of the first fixture. Insert a male termination

plug (see page 13) in the OUT socket of the last

fixture.

4 Select any one fixture to be the master. On this

fixture, set DIP-switch pins 2 and 10 to ON. Set

custom master options with pins 1, 4, and 5. Set pins

3, 6, 7, 8, 9, 11, and 12 to the OFF position.

5 On all other fixtures (slaves), set DIP-switch 10 to ON.

Set custom slave options with pins 6, 7, 8, and 9. Set

pins 1, 2, 3, 4, 5, 11, and 12 to the OFF position.

6 Apply power to the master fixture before the slaves.

Female XLR

Female

120

Termination Plug

P/N 91613018

102 3 4 51 86 7 9

1211

Master setting

102 3 4 51 86 7 9

1211

Slave setting

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Sem comentários

Martin MX SERIES Manual do Utilizador Página 11