Martin EFX800 Manual do Utilizador descarregar pdf (Página 14)

14 Mania EFX user manual

signal polarity (pin 2 hot and pin 3 cold). Connector polarity is normally

specified on the device or in the device’s user manual.

To connect the data link:

1. Power all devices off.

2. If you intend to use a DMX controller, run a data cable from the DMX

controller’s data output to the first fixture’s data IN socket. If the

controller has a 5-pin output, use a 5-pin male to 3-pin female adaptor

cable (P/N 11820005).

3. If you intend to run fixtures in master/slave operation, insert a female

DMX termination plug (P/N 91613018) in the first fixture’s data IN

socket.

4. Plug a data cable into the OUT socket of the first fixture and the IN

socket of the next one. Continue connecting up to 32 Mania EFXs

output-to-input.

5. Terminate the link by inserting a male termination plug (P/N 91613017)

into the data output of the last fixture. A termination plug is simply an

XLR connector with a 120 Ohm, 0.25 W resistor soldered across pins 2

and 3.

Gobo wheels

All Mania EFX fixtures contain a gobo wheel. Note that it is the whole

wheel, and not the individual gobos, that rotates. Rotating gobo image

effects are created by the mirror dish.

•The EFX500 has 11 colored gobos plus blackout.

•The EFX600 has 12 colored gobos.

•The EFX700 has 12 colored gobos.

•The EFX800 has 12 gobos. Color is provided by the color paddlewheel.

Phase-Reversing

Adaptor

Male Female

3-pin to 3-pin

P/N 11820006

Adaptor

Male Female

5-pin to 3-pin

P/N 11820005

Adaptor

Male Female

3-pin to 5-pin

P/N 11820004

Male XLR

Male

P/N 91613017

120 Ohm

Termination Plug

DMX connectors and polarity

Female XLR

Female DMX

120 Ohm

Termination Plug

P/N 91613018

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Comentários a estes Manuais

Sem comentários

Martin EFX800 Manual do Utilizador Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Holofotes Martin EFX800