Martin CX-2 Manual do Utilizador descarregar pdf (Página 16)

16 DMX operation CX-2 user manual

1-CHANNEL DMX OPERATION

The functions shown in the following table are available in 1-channel mode.

When a “stand-alone” function is selected, the fixture steps through a routine

using a built-in microphone to trigger the action to the beat of the music. Note that

multiple fixtures cannot be synchronized in this mode.

FULL DMX OPERATION

See also the DMX protocol on page 20.

Channel 1 controls the light intensity and the strobe rate. It also allows you to

execute a “stand-alone” program with random color and gobo change using

automatic or music trigger.

All effect wheels are reset to their home position when the fixture is powered up;

they can also be reset from the controller by sending a reset command on channel

Channel 2 controls the position of the color wheel. When set to 100 percent, the

wheel moves to random positions using the trigger selected on channel 1.

Channel 3 controls the position of the gobo wheel. When set to 100 percent, the

wheel moves to random positions using the trigger selected on channel 1.

Channel 4 controls the speed of effect wheel rotation, allowing you to vary the

speed on controllers without cross-faders. If your controller has cross-faders, and

you use them, then set channel 4 to the “tracking” speed (0 percent).

DMX value Percent Function

0 - 10

11 - 20

21 - 80

81 - 115

116 - 140

141 - 175

176 - 210

211 - 255

0 - 4

5 - 7

8 - 31

32 - 45

46 - 55

56 - 68

69 - 82

83 - 100

Blackout (light off)

Open (light on)

Strobe

Stand-alone with slow music trigger

Stand-alone with medium music trigger

Stand-alone with fast music trigger

Stand-alone with random music trigger

Manual trigger area, crossover at 240 (94%)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários

Martin CX-2 Manual do Utilizador Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Holofotes Martin CX-2