Martin Acrobat Manual do Utilizador descarregar pdf (Página 18)

18 Basic service Acrobat user manual

ASIC

SERVICE

To set the 6/7-ch. DMX jumper

1 Disconnect the fixture from power.

2 Remove the effects section cover. It is secured by 5 Torx-20 screws: 3 on the

side with print and 2 on the other side.

3 Locate PL 118 on the printed circuit board, next to DIP-switch pin 12.

4 Using a pair of tweezers or similar tool, place the jumper on 1 of the 2 pins, or

remove it completely, for 6-channel DMX operation. Place the jumper on both

pins to enable 7-channel DMX operation.

5 Replace the cover before applying power.

To replace the main fuse

1 Unplug the mains cable from the input socket. Pry open the fuse holder and

remove the fuse.

2 Replace the fuse with one of the same type. The fuse rating is listed on serial

number label.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Martin Acrobat Manual do Utilizador Página 18