Martin ATOMIC 3000 Manual do Utilizador descarregar pdf (Página 5)

Atomic 3000 user manual Safety information 5

• Keep all combustible materials (for example fabric, wood, paper) at least 0.5

meters (20 inches) away from the fixture. Keep flammable materials well away

from the fixture.

• Do not illuminate surfaces within 1 meter (39 inches) of the fixture.

• Provide a minimum clearance of 0.1 meters (4 inches) around air vents.

• Never place filters or other materials over the front glass cover.

• The exterior of the fixture can reach temperatures up to 120° C (248° F). Allow

the fixture to cool for at least 15 minutes before handling.

• Do not modify the fixture or install other than genuine Martin parts.

• Do not operate the fixture if the ambient air temperature (Ta) exceeds 40° C (104° F).

To guard against falls

• When suspending the fixture above ground level, verify that the structure can

hold at least 10 times the weight of all installed devices.

• Verify that all external covers and rigging hardware are securely fastened and use

an approved means of secondary attachment such as a safety cable.

• Block access below the work area whenever installing or removing the fixture.

To guard against epileptic seizure

• Do not operate the fixture near stairways.

• Provide advance notice that strobe lighting is in use.

• Avoid extended periods of continuous flashing, particularly at frequencies of 10

to 20 flashes per second.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Sem comentários

Martin ATOMIC 3000 Manual do Utilizador Página 5