Martin ATOMIC 3000 Manual do Utilizador descarregar pdf (Página 22)

22 Service Atomic 3000 user manual

ERVICE

Warning: High voltage! Do not remove the rear panel. There are no user-

serviceable parts inside.

FUSE REPLACEMENT

The Atomic 3000 uses a 20 amp time-delay fuse for protection against current

overload. If the power diode does not light when power is applied, the fuse may

be spent. If the fuse blows repeatedly, there is a fault with the unit that requires

service by a Martin technician.

Never bypass the fuse or replace it with one of another size or rating.

Replacement fuses may be ordered by P/N 05020040.

To replace the fuse

1 Disconnect the fixture from AC power.

2 Unscrew the fuse holder, located on the side plate nearest the power cord.

Remove the spent fuse from the holder and replace it with an identical 20 amp

6.3 x 32 mm time-delay fuse.

3 Replace the fuse holder in the side plate.

FIRMWARE UPDATES

If you suspect that the firmware installed on your Atomic 3000 has become

corrupted, please contact your Martin dealer for assistance.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

Martin ATOMIC 3000 Manual do Utilizador Página 22