Martin RoboColor III Especificações

Robocolor II Systemusers guide

CONTENTSINTRODUCTION ... 3INSTALLING THE ROBOCOLOR II SYSTEM ... 3OPERATING WITHO

WARNING!Do not attempt to operate the Robocolor II Heads without the Robocolor II Controller(e.g. plugging the Robocolor II directly into the mains ou

OPERATING STAND ALONE IN MASTER/SLAVE MODEIf you have two or moreRobocolor II Systems, this feature - Stand Alone in Master/Slavemode - allows you to

unused data output socket on the unit. This plug is supplied with all Martin controllers andhas a 120 Ohm resistor between pin 2 and 3 (Martin part no

3 pin XLR to 5 pin XLR cable(3 pin Robocolor II Output to 5 pin DMX Input)Description 3 Pin female XLR (Out) 5 Pin male XLR (In)Ground (screen) 1 1(-)

Example: Pin 2, 3, 7 and 8 ON will set DMX channel = 0 + 2 +4+0+0+0+64+128+0=198.DIP-Switch valuesSwitch Value Switch Value Switch Value Switch Value1

Each DMX channel in theRobocolor II Systemis used to provide several different functionsdepending on where it is set within 0-255 increments. The func

SPECIAL DIP-SWITCH SETTINGSDescription DIP-switches ONProtocol auto-detect (DMX/Martin)Stand Alone Sequence - Auto-triggerStand Alone Sequence - Music