Martin MAC 700 PROFILE Manual do Utilizador Página 11
- Página / 40
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Rigging 11
Rigging
The MAC 700 Wash can be placed on stage or clamped to a truss in any orientation. The mounting points
allow the clamp brackets to be fastened parallel or perpendicular to the front as shown Figure 6.
Warning! Always use 2 clamps to rig the fixture. Lock each clamp with both 1/4-turn fasteners. The
fasteners are locked only when turned fully clockwise.
Warning! Attach an approved safety cable to the attachment point labelled “SAFETY WIRE” in the
base. Never use the carrying handles for secondary attachment.
To clamp the fixture on a truss
1. Check that the rigging clamps are undamaged and can bear at least 10 times the weight of the fixture.
Check that the structure can bear at least 10 times the weight of all installed fixtures, clamps, cables,
auxiliary equipment, etc.
2. Bolt each clamp securely to a clamp bracket with an M12 bolt (minimum grade 8.8) and lock nut.
3. Align a clamp with 2 mounting points in the base. Insert the fasteners into the base and turn both levers
a full 1/4-turn clockwise to lock. Install the second clamp.
4. Block access under the work area. Working from a stable platform, hang the fixture on the truss with the
arrow towards the area to be illuminated. Tighten the rigging clamps.
5. Install a safety wire that can bear at least 10 times the weight of the fixture. The attachment point is
designed to fit a carabiner clamp.
6. Check that the tilt lock is released.
7. Check that there are no combustible materials within 0.5 meters (20 inches) of the fixture, no surfaces to
be illuminated within 1.2 meters (42 inches) of the fixture, and that there are no flammable materials
nearby. Check that there is 0.1 meters (4 inches) clearance around air vents.
8. Check that there is no possibility of heads or yokes colliding with other fixtures.
Figure 6: Clamp bracket positions and safety wire attachment point
- MAC 700 Wash 1
- Dimensions 2
- Safety information 3
- Contents 5
- Introduction 6
- AC power 7
- About the discharge lamp 8
- Lamp replacement 8
- To align the lamp 9
- DMX data link 10
- Rigging 11 11
- Control panel 12
- Readouts 13
- Service messages 14
- Manual control 14
- Service utilities 14
- To calibrate effects 15
- Lamp power 16
- Fixture reset 16
- Dimming and strobe 16
- Effects 17 17
- BLACKOUT 18
- PERSONALITY OVERRIDES 18
- Optical configuration 19
- Routine maintenance 20
- Cleaning 21
- Lubrication 21
- Replacing the lamp socket 22
- Software installation 22
- MAC 700 Wash DMX protocol 23
- = (menu override) 25
- = (menu override) 25
- = (menu override) 25
- = (menu override) 25
- = (menu override) 25
- Control menu 26
- Table 2: Control menu 27
- Adjustment submenu 29
- Control menu shortcuts 30
- Display messages 31
- Troubleshooting 32
- Circuit board connections 33
- MAC 700 Wash specifications 34
Manuais e produtos relacionados com Controladores de DJ Martin MAC 700 PROFILE
(7 páginas)
(40 páginas)
(30 páginas)
(28 páginas)STIEBEL ELTRON SHW ... S 24.01.2005 - 31.11.2007 manuály
Uživatelské manuály a uživatelské příručky pro Bojler STIEBEL ELTRON SHW ... S 24.01.2005 - 31.11.2007.
Poskytujeme 1 manuály pdf STIEBEL ELTRON SHW ... S 24.01.2005 - 31.11.2007 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais