Martin MAC 600E Manual do Utilizador descarregar pdf (Página 7)

Description

The MAC 600 NT is an automated,

yoke-mounted, Fresnel washlight for

a 575 Watt source. It provides cyan,

magenta, and yellow (CMY) color

mixing; 0 - 178 mireds color correction,

4-position color wheel, 0 - 100 percent

dimming, high-speed shutter, beam-

shaping, and variable frost.

Physical

•

Length: 356 mm (14.0 in)

•

Width: 481 mm (18.9 in)

•

Height (head at tilt limit):

652 mm (25.7 in)

•

Weight: 31.5 kg (69.3 lbs)

Source

•

Lamp: 575 W discharge

•

Base: GX 9.5

•

Approved models: Philips MSR 575/2,

MSD 575; Osram HSR 575/2, HSD 575

•

Control: automatic and/or remote

on/off

Standard photometrics

•

Light output (MSR 575/2):

20,500 lumens

•

Illuminance (lux or fc):

291,093 cd / distance

(m or ft)

•

Diameter: 0.44 x distance

•

Field angle: 25°

•

Measurement conditions: 230 V,

50 Hz; no color or effects applied

•

Measurement source:

Philips MSR 575/2

Optional narrow angle

photometrics

•

Illuminance (lux or fc):

721,920 cd / distance

(m or ft)

•

Diameter: 0.31 x distance

•

Field angle: 18°

•

Measurement conditions: 230 V,

50 Hz; no color or effects applied

•

Measurement source:

Philips MSR 575/2

Optional wide angle

photometrics

•

Illuminance (lux or fc):

34,560 cd / distance

(m or ft)

•

Diameter: 1.25 x distance

•

Field angle: 65°

•

Measurement conditions: 230 V,

50 Hz; no color or effects applied

•

Measurement source:

Philips MSR 575/2

Thermal

•

Maximum ambient temperature (Ta):

40° C (104° F)

•

Maximum surface temperature:

140° C (284° F)

•

Total heat dissipation: 2560 Btu/hr

Control and programming

•

Control protocol: USITT DMX-512

•

Setting and addressing: LED control

panel, remote with MP-2 Uploader

•

Firmware update: serial upload (MUF)

•

Pan/tilt resolution: 8- or 16-bit

•

DMX speed control: tracking and/or

vector

•

DMX channels: 11 - 15

•

Receiver: Opto-isolated RS-485

•

Data I/O: locking 3-pin XLR female;

pin 1 shield,pin 2 cold (-), pin 3 hot (+)

AC Supply

•

AC input: 3 m trailing cable w/o cord

cap

•

Wiring options: 200/230/245 V, 50 Hz;

208/227 V, 60 Hz

•

Maximum power and current: 750 W,

4.2 A @ 208 V, 60 Hz; 750 W, 3.9 A

@ 750 W 3.9 A

Design standards

•

EU EMC: EN 50 081-1, EN 50 082-1

•

EU safety:EN 60598-1,EN 60598-2-17

•

Canadian safety: CSA C22.2 No. 166

•

US safety: ANSI/UL 1573

Electromechanical

•

Cyan filter: 0 - 100%

•

Magenta filter: 0 - 100%

•

Yellow filter: 0 - 100%

•

Color correction filter: 0 - 178 mireds

•

Color wheel: 4 interchangeable

filters + open

•

Dimmer: 0 - 100%

•

Shutter: flash up to 8 Hz

•

Beam shaper: 0 -180°

•

Frost filter: 0 - 100%

•

Pan: 440° in 0.013° steps

•

Tilt: 306° in 0.007° steps

Construction

•

Housing: steel and aluminum with

molded plastic yoke covers

•

Color: black (RAL 9005)

•

Metal finish: electrostatic powder

coating

•

Protection factor: IP 20, IP 44 with

Outdoor Protection Dome

Installation

•

Mounting points: 8 pairs of 1/4-turn

locks, offset 45°

•

Orientation: any

•

Minimum installation distance,

center-to-center: 457 mm (18 in)

•

Minimum distance to combustible

materials: 1 m (39 in)

•

Minimum distance to illuminated

surfaces: 1 m (39 in)

Ordering information

•

MAC 600 NT: 90210400

•

MAC 600 eNT: 90210600

Included items

•

1/4-turn Omega bracket,

MAC 500/600 (2): 91602001

•

XLR cable: 5 m, black, 3-pin

male/female: 11820008

•

Sidelight protector (snoot) 17100010

•

User manual: 35000088

Accessories

•

Outdoor Protection Dome:

90525010

•

MP-2 Uploader: 90758420

•

Flight case for 2 x MAC 500/600:

91510002

•

18° "long front" with Fresnel lens:

91610005

•

65° floodlight diffuser on standard

front: 91610008

•

Super-wide angle lens: 41600041

•

G-clamp: 91602003

•

Half-coupler clamp: 91602005

•

The Martin Wife: 91611038

•

Martin King Dome

Specification

General

The MAC 600 NT is an automated

yoke-mounted Fresnel washlight desig-

ned for a 575 Watt source. It provides

CMY color mixing, continuous color

correction, four removable color filters,

full-range continuous dimming,separate

shutter, beam-shaping, and frost.

The MAC 600 E NT is an electronic

ballast version that provides flicker-

free operation and an economic power-

saving mode.

Mechanical effects

The luminaire provides subtractive

cyan, magenta, and yellow color mix-

ing; a separate wheel with removable

red, green, blue, and UV-transmitter

filters; and a continuous 0 - 178 mireds

color correction filter. All filters are

dichroic glass. The luminaire provides a

mechanical dimmer to regulate output

intensity from 0 to 100 percent and a

separate mechanical stopping shutter

to open and close the light at variable

speeds of up to 8 flashes per second.

It also provides a dynamic glass beam

shaper that rotates 180° and a variable

frost filter that widens and softens the

beam. The yoke pans 440° in 0.013°

steps; the head tilts 306° in 0.007°

steps. The pan and tilt position are

monitored by a feedback system cap-

able of rapidly correcting externally

introduced errors.

Control

The luminaire has two locking 3-pole

XLR connectors for serial data transfer.

It responds to command signals confor-

ming to the USITT DMX512 (1990)

standard. All user-selected settings are

adjustable via an onboard control panel

with LED display or with a remote

control unit.

Performance

In the standard configuration, when

fitted with a new MSR 575/2 discharge

lamp, and with no colors or effects

applied, the luminaire emits a total

luminous flux of 20,500 lumens in a

beam 25° wide, where the outside

edge of the beam is defined as the

circle having one-tenth the intensity of

the beam's midpoint.

Housing

The luminaire is constructed of sheet

steel and aluminum. The exterior finish

is an electrostatically applied powder

coating. Non-structural covers are con-

structed of molded plastic. The color is

black.

Installation

The luminaire operates in any orienta-

tion. It is supplied with two brackets to

which mounting clamps may be faste-

ned. The brackets attach to the base

with quarter-turn fasteners such that

the luminaire may be installed at any

increment of 45° in the plane defined

by the luminaire's base. When installed

above floor level, secondary attach-

ment is fastened to a reinforced attach-

ment point.

Electrical

The luminaire operates on 50 Hz sup-

plied at 200, 230, and 245 volts; and on

60 Hz supplied at 208 and 227 volts,

+/- five percent. It is fitted with a 3

meter (9.8 ft.) length of three conductor

1.5 sq. mm (16 AWG) electrical cable

for connection to AC power. The lumin-

aire must be electrically grounded.

The luminaire is cETL certified for

compliance with CSA standard C22.2

No. 166, and ETL certified for complian-

ce with ANSI/UL standard 1573.

(Certification pending.) It conforms with

CE safety standards EN 60598-1 and

EN 60598-2-17, and with CE electro-

magnetic compatibility standards EN 50

081-1 and EN 50 082-1.

Environmental

The luminaire must be located in a dry

area in which the ambient temperature

does not exceed 40° C (104° F). If the

luminaire is to be exposed to moisture

or precipitation, it should be furnished

with and installed in a protective hou-

sing with a minumum IP rating of 44.

Physical

The maximum dimensions of the luminaire

(without accessories) are 356 x 481 x 652

mm (14.0 x 18.9 x 25.7 in). Its weight does

not exceed 31.5 kg (69.3 lbs).

For a MAC 600 NT specification quote, see the

product page on the Martin website: www.martin.dk

Specifications

Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.dk

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Martin MAC 600E Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Controladores de DJ Martin MAC 600E