Martin P3 PowerPort 1500 Manual do Utilizador

VC-Grid™User Manual

10 VC-Grid Safety and Installation Guide7. When the P3 link and all VC-Grids are connected and you are ready to set up and test the installation:• Co

System installation 11Installing a DMX-controlled systemThe DMX link requires DMX cable. It can be maximum 300 m (1000 ft.) in length, but this can b

12 VC-Grid Safety and Installation GuideHybrid lead-in Hybrid-to-PCB48 VDCexternal PSUDMX/RDM Controller48 VDC powerDMX link (DMX cable)Hybrid (DC po

System setup 13System setupWarning! Before applying power to the VC-Grid:• Carefully review the safety information starting on page 4• Check that the

14 VC-Grid Safety and Installation GuideIf a VC-Grid module is set to individual pixel control (see “Setting modules to grouped or pixel control mode

System setup 15Setting DMX AddressesSee Figure 7. To set DMX addresses using the M-PC application, open the RDM View window and click on Scan to disp

16 VC-Grid Safety and Installation GuideUsing the VC-GridWarning! Before applying power to the VC-Grid:• Carefully review the safety information star

Using the VC-Grid 17LED status feedbackThe VC-Grid gives status information via its LEDs as shown in Table 2:To display status, press the control but

18 VC-Grid Safety and Installation GuideService and maintenanceWarning! Read “Safety Information” on page 4 before carrying out service on the VC-Gri

Troubleshooting 19Troubleshooting Problem Probable cause(s) RemedyControl is lost and pressing control button causes VC-Grid to show constant or flas

DimensionsAll measurements are expressed in millimeters18518185© 2012 Martin Professional A/S. Information subject to change without notice. Martin Pr

20 VC-Grid Safety and Installation GuideSpecificationsPhysicalLength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications 21ConstructionBase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Related ItemsP3 PowerPort 1500™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 90721

www.martin.com • Olof Palmes Allé 18 • 8200 Aarhus N • DenmarkTel: +45 8740 0000 • Fax +45 8740 0010

ContentsSafety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 VC-Grid Safety and Installation GuideSafety InformationThe following symbols are used to identify important safety information on the product and i

Safety Information 5• Each VC-Grid 8x8 25 consumes up to 30 W. Do not interconnect VC-Grids 8x8 25s in a chain with a total power consumption that ex

6 VC-Grid Safety and Installation GuideIntroductionThank you for selecting the Martin VC-Grid™. This compact LED-based display module is designed to

VC-Grid overview 7VC-Grid overviewFigure 1: OverviewCBAA - Control buttonB - 48 VDC power + data throughput (THRU)C - 48 VDC power + data input (IN)

8 VC-Grid Safety and Installation GuidePhysical installationThe VC-Grid can be installed in any orientation.The backs of modules are marked with arro

System installation 9System installationWarning! Connect the VC-Grid™ only to the devices specified in this manual and only using the Martin™ cables