Martin DMX Switch Pack Manual do Utilizador

T-Rexuser manual

10 T-Rex user manualSERVICE5With the exception of the mains fuse and the lamp, there are no user-serviceableparts inside the T-Rex. Please refer all s

Service 11Installing a lamp in the T-Rex1 Disconnect the fixture from AC power. If replacing a lamp, allow it to cool for 5minutes before removing the

12 T-Rex user manualTROUBLESHOOTING6Problem Probable cause(s) RemedyFixture is completely dead.No power to fixture. Check that power is switched on an

Specifications 13SPECIFICATIONSAPHYSICAL• Size (L x W x H)... 490 x 164 x 190 mm (19.3 x 6.5 x 7.5 in)• Weight...

14 T-Rex user manual• Primary fuse...5.0 AT / 250 V, P/N 05020018• Maximum power and current.

www.martin.dk • Olof Palmes Allé 18 • 8200 Aarhus N • DenmarkTel: +45 8740 0000 • Fax +45 8740 0010

Measurements are expressed in millimeters.4901234657 8164 2252851901 Lamp access2 Focus adjustment3 Mounting bracket4 Swivel locks5 Clamp hole6 Air ve

3Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4T-Rex safety information . . . . . . . . . . . . . . .

4 T-Rex user manualINTRODUCTION1Thank you for selecting the Martin T-Rex. This lighting fixture uses a 250 watthalogen lamp, a moving 4-facet mirror,

Introduction 5• Keep all combustible materials (for example fabric, wood, paper) at least 0.3 meters (12 inches) away from the fixture. Keep flammable

6 T-Rex user manualAC POWER2The T-Rex’s operating voltage is printed on the serial number label near the ACinput. Verify that the operating voltage cl

Installation 7INSTALLATION3The T-Rex can be permanently installed or hung with a clamp (not included), or itcan be placed on the floor. For maximum la

8 T-Rex user manual5 Working from a stable platform, clampor fasten the fixture to the structure.6 Install a safety cable that can hold atleast 10 tim

Operation 9OPERATION4Warning! Verify that the power cables are undamaged and rated for the current requirements of all connected devices before use. I